HOW TO ROOT YOUR GALAXY I5800/I5801

Posted: ডিসেম্বর 29, 2011 in android
ট্যাগসমূহ :, , , , ,
First you have Need .Net Framework 2.0 or grater to run SuperOneClick. If you use windows xp, no need if using windows 7.
Download .Net Framework below
2. Extract the files to Your desktop.
3. Open SuperOneClick, If you get a security warning when opening SuperOneClick, just press “Run”
ensure that USB DEBUGGING is on in your phone.
go to yours phone menu>settings>application>development to on usb debugging.
4. Plug your phone into your computer via USB cable, Take out your SD card and
Sim Card!
5. Click the “Root” Button and wait 2 or 3 minute. When finished rooting you can see superuser application icon on your app drawer.
6. Now you can run an app which need root. You can try Adfree to stop ad from free apps.
I am not responsable for any damage
to your device.

Update Samsung GT I5800/i5801 Android 2.1(Eclair) to 2.2 (Froyo)

Posted: ডিসেম্বর 29, 2011 in android

Here’s an easy way to how to update your Samsung galaxy I5800/I5801 in 2.1(Eclair) to 2.2 (Froyo)
You have need

*OPS file*Download the 3 files and place in your desktop so that you can easily find that files. Extract the froyo update, if it want password than you enter the password as samfirmware.com*When you update firmware than you lost all of your data like contacts, sms, third party application, music, image, video.
So I highly recommend you to backup off all your data.

* You must ensure that at least 75% bettary life to upgrade process
Also, make sure that your computer or laptop has a supports USB 2.0

*you will have to now switch your phone Off and then pull out the Sim card as well as the Memory card so that data in it doesn’t get deleted

*Now, you will have to turn your phone ON in the Download Mode which basically acts as a safe mode for your phone and the same can be entered by holding the Volume Down button + the Home key button (the middle button), while holding these both buttons, you need to switch ON your device by Pressing the Power ON button.

* now you need to open the exe file Odin multi downloder.

*As soon as you connect your phone to the computer via usb cable, and you will see that in the “Odin Multi Downloader”, the COM Port Mapping block will turn yellow and will show up 1 (COM 6) int he box which will mean that the required drivers have been successfully installed after which in the Message field you will see that <1> Detected!!!

*In the Option field you need to ensure that One Package, Auto Reboot and Protect OPS options are ticked and in the “Reset Time (Sec) and Debug only field is unticked.

* Now, next up you will have to select the below mentioned FILES which you have downloaded as mentioned below in the Odin Multi downloader,

OPS – Galaxy3_0531.ops file

One Package– I5801DXJPC-PDA-CL1026982.tar.md5

*Do ensure and double check that the selections are done as per mentioned above.

*After double checking the selections, proceed by clicking on the “Start” option and you will see that after sometime the process will be completed, generally it takes a minute or two not more than that to finish the upgradation process, do note that you don’t pull off the USB cable in the upgradation process as this will seriously damage the phone and your phone will become no less than an expensive paper weight as that will be bricked though this is an unlikely event and if power goes in between then not to worry you just have to follow the procedure again from the start.

*As soon as the update gets finished you will see that the phone will be rebooting and you will see that you phone will be prompting you to enter all the initial settings, and now you can unplug the USB cable from your phone.

*There you go you have now successfully installed the latest Froyo 2.2 version on your Galaxy 3 I5801
cheears

শুরুতেই বলে নিই , এই পদ্ধতি শুধুমাত্র ২.১ ইক্লেয়ার ভার্সনের জন্য প্রযোজ্য।

বর্তমানে অনেক মানুষ এন্ড্রয়েড পাওয়ার্ড মোবাইল ব্যবহার করছেন।আমারো অনেক
দিনের শখ  এন্ড্রয়েড মোবাইল ব্যবহারের। শেষ পর্যন্ত কিনেই ফেললাম একটা
এন্ড্রয়েড মোবাইল। কিনেই সবার আগে যে সমস্যায় পরলাম তা হলো এন্ড্রয়েড
মোবাইলগুলো বাংলা ফন্ট সাপোর্ট করেনা। যার কারনে প্রথমে অনেক মন খারাপ
হয়ে ছিলো।  যাই হোক গুগল মামুরে জিগাইলাম কেম্নে কি করা যায়। মামু আমারে
নিরাশ করে নাই। অনেক গুলা উপায় পাইলাম।  কিন্তু বেশির ভাগ ই জটিল
প্রকিতির। সবচেয়ে সহজ পদ্ধতিটাই এখন আপনাদের দেখবো।

বাংলা লিখতে চাইলে প্রথমে আপনার ফোনে বাংলা ফন্ট ইনস্টল কর্তে হবে। আর
বাংলা ফন্ট ইনস্টল করতে আপনার ফোনকে root করতে হবে। ও হ্যা একটা কথা রুট
করলে কিন্তু আপনার সেটের  ওয়ারেন্টি ভয়েড হয়ে যাবে। অতএব যা করবেন নিজ
দায়িত্ত্বে করবেন।

রুটিং:

রুট করার জন্য আপনি z4root বা suoer one click ব্যবহার করতে পারেন । আমি
আমার ফোনে z4root  ব্যবহার করেছি কারন ওটাই আমার কাছে সহজ মনে হয়েছে।
এই এপটা  মার্কেটে পাবেন না। সরিয়ে ফেলা হয়েছে।

এখান থেকে ডাউনলোড করুন z4root

এবার এপটা আপনার ফোনে ইনস্টল করুন।
দেখবেন দুইটা অপশন আছে
১/ টেম্পোরারি রুট
২/ পার্মানেন্ট রুট
আপনার যেটা ইচ্ছা করুন। আমি অবশ্য পার্মানেন্ট রুটই করেছি। রুট হয়ে গেলে
ফোন রিবুট কর্তে বলবে। ব্যাস হয়ে গেল আপনার রুটি ।

এবার ফন্ট ইনস্টলেশন

এখানে আপনার লাগবে
১/ সোলাইমানলিপি বা রুপালি বাংলা ফন্ট
২/font changer (মার্কেটে পাবেন )
এই দুইটা ফাইল ডাউনলড করে নিন।

এবার ফন্টচেঞ্জার টি ওপেন করুন।  নিচের  ছবির মত দেখবেন  বেসিক, এডভান্সড
image
এবার এডভান্সড এ ক্লিক করুন। আপনার ফোনে যে ফন্ট গুলা আছে তার তালিকা পাবেন ।
image
এবার droidsansfallback.ttf
নামের একটা ফন্ট পাবেন। এই ফন্টটার উপর হাল্কা চাপ দিন এবং ২সেকেন্ড ধরে রাখুন।

এবং নিচের ছবির মত দেখতে পাবেন ।  সেট  এবং প্রিভিউimage
আপনি সেট এ  ক্লিক করুন এবং আপনার ডাউনলড ক্রিত ফন্ট টি কোন ফোল্ডারে আছে
তা দেখিয়ে দিন।
image এবার ফন্ট টি সিলেক্ট করুন। এখন নিচের ছবির মত এপ্লাই
করুন।
image
এবার আপনাকে ফোন রিবুট কর্তে বলবে। imageরিবুট করুন ।   ব্যাস এবার
আপনার ফোন প্রস্তুত বাংলা লেখার জন্য। ও বাংলা লেখার জন্য আপনার লাগবে
মায়াবী বাংলা কিবোর্ড। এটাও মার্কেটে পাবেন। ডাউনলোড করে নিন।
এবার আপনার ফোনের settings>locale and text> input method এ যান  এবং
মায়াবী কি বোর্ড সিলেক্ট করুন।  ব্যাস এবার আপনার এন্ড্রয়েড দিয়েই বাংলা
লিখুন।

Posted from WordPress for Android